Bumper Products

Heavy Duty Steel Front Bumpers for Ford, Dodge, and Chevy Trucks.

We build ranch style, Heavy Duty style and Winch style bumpers. All of our steel front bumpers are manufactured with 3/16" steel and mounts are 3/8" steel that bolt through existing holes (no drilling). Our mounts enforce the protection of our front bumper.

We sell all truck bumpers powder coated with your choice of colors, or may be purchased as raw steel. Bumpers are sold with brushguards, or optionally without.

Bumper Options

• Truck bumpers sold with or without brushguards / powdercoating
• Tow hook holes built into most bumpers, tow hooks and welded tow hooks available
• 4" lights available
• 2" inset receiver for: portable winch, license plate, or receiver ball

Materials Used:
All Heavy Duty Truck Bumpers are built using thick 3/16 steel, and mounts are 3/8 steel. Mount thickness is important for front truck protection.

Brush Guards for Trucks:
Middle Brush Guard is made from round tube 2.5 X .120 cold roll, and sides are round 1.25 X .120 hot roll.

Front Bumper Removal & Installation:
These times reflect an installer that is experienced.
Installation:
Chevy Bumper without lights usually takes 1 hour.
Ford Bumper without lights usually takes 1.5 hrs.
Dodge Bumper without lights usually takes 2.5 hrs.

Winch Truck Installation takes an additional 2hr and 1/2 (if again there are no complications)

Powder Coating:
We use a very reputable powder coating company in Bend. They will match to any color code or preference that you choose.

The powders that are used are cardinal industrial finishes.

We recommend the following different powder coatings:

• Silver vein with gloss clear coat
• Black hammer with gloss clear coat
• There are also other powders available to choose from, depending on your preference.

All Winch Bumpers Are Compatable With:

• WARN M-SERIES 8,000 to 15,000
  • 16.5k Re quires modification to the top of Bumper prior to Powder Coating
• T-MAX TMEW 8,500 to 11,000
  • Must Re-Locate Electric Box to Side Mount of Motor
• T-MAX OUTBACK EW 9,000W, 10,000W, 12,500W
  • Must Re-Locate Electric Box to Side Mount of Motor
• RAMSEY Patriot
  • 15,000k

**Note: Integrated Winches Do Not Mount Correctly

Receiver Tube - 2" Inset:

• Use it with a receiver style winch mount, license plate mount, or put a receiver ball

Quality:

• High Quality, very durable steel bumper
• Construction: front protection that will last

Appearance:

• Compliments your style truck. Sets you apart from the other trucks.
• All corners and edges are smooth and shaped to contour body style

Advantage:

• Strength and utility
• Keeps wild life from harming you or your truck